Most Read
Most E-mailed
E-mail Article
Print Article
Extending Quality into the Global Supply Chain
Trek Bicycle Corporation uses a Web-based SPC solution to gain real-time visibility into quality on its suppliers' plant floor
By Andrew K. Reese
When Alberto Contador and Lance Armstrong stood on the podium at the end of the Tour de France this year, one of the biggest winners not standing beside them was Trek Bicycle Corporation. The Waterloo, Wis.-based manufacturer provided the bicycles that Armstrong rode to seven consecutive Tour victories, and they were back again this year with the carbon-fiber marvels that helped propel Contador and Armstrong into first and third place, respectively, in Paris.
Trek started out with five employees making hand-built steel touring frames in a rented barn in Waterloo in 1976. Today, Trek has long since expanded beyond the barn into modern research, engineering and manufacturing facilities in Waterloo, where the company still produces high-end carbon frames. At the same time, like many manufacturers, Trek has formed partnerships with overseas suppliers in Taiwan and the People's Republic of China that provide components, frames and some fully assembled bikes.
Quality is of supreme importance in the bike industry, of course — no one wants to think about defect issues while they're riding on a sliver of rubber at 40-plus miles per hour down a twisting mountain road — and Trek has been working to drive quality back into its supply chain to ensure that every product coming into its facilities from overseas is up to spec every time. To that end, the company has ramped up the involvement of its supplier quality group with all the new products being developed in Asia. As part of that effort, the company has been working with key suppliers to deploy a system that will give the quality team in Waterloo real-time insights into product quality before a component or frame even leaves the factory in Taiwan or Mainland China.
Quality in Real Time
Julie Wilhelm, supply chain quality manager with Trek, says that, in the past, the bike manufacturer did not have visibility into quality issues until products arrived at its U.S. facilities, when it was too late to take corrective action. "It was the same cause all the time," Wilhelm says. "We hadn't reviewed what the supplier was doing thoroughly enough, and we didn't always provide them with the best specification." Trek was already using a quality solution called ProFicient from InfinityQS International for statistical process control (SPC) within its own facilities, but the company had no way of extending the quality process out to its suppliers' plant floor.
That changed when Wilhelm learned about the eSPC solution that InfinityQS launched in 2006. eSPC is a hosted solution that can connect disparate, far-flung manufacturing locations within a single enterprise or across a supply chain to a shared database of quality data. That allows quality managers and engineers at a central location to analyze supplier quality data and evaluate incoming materials prior to delivery. "Because eSPC is Web-based and was meant to work with suppliers, I latched onto it," says Wilhelm, who had worked with the solution provider's offerings both at Trek and in a previous quality role at Rayovac Corporation.
The functionality that drew Wilhelm to eSPC included the potential to gain real-time access to all key dimensions of Trek's products being manufactured by suppliers. The company's engineers would be able to view those data as they were generated in trend chart format and do capability or other analyses, or download the data for further processing. The solution also provided for real-time alerts via e-mail so that Trek's quality staff on the ground in Asia could learn about developing issues immediately, allowing them to show up at the supplier the same day if necessary to deal with problems before any product left the plant.
Cultural Awareness
Beginning in late 2007, Trek initially targeted four suppliers to begin working with eSPC — two in Taiwan, two in Mainland China. The company chose to start with suppliers of higher-end product and focused initially on just one parameter, weight, which is crucial in its top-end bicycles. "We sold it to them from the angle that they were key vendors and that weight is crucial, so they could get onboard with us and start collecting the weight data to stay at the high end of our business," Wilhelm explains.
She adds that Trek chose these specific suppliers in part because they were more proactive in seeking new ways to work with the bike manufacturer. "There are other companies that would have been tougher to work with because they are very much inspection-based and they didn't see the value in investing money upfront to prevent defects," she says. "We purposely picked companies that were more willing to work with us and do what we need. So knowing the culture of the company you're dealing with is very beneficial."
When Alberto Contador and Lance Armstrong stood on the podium at the end of the Tour de France this year, one of the biggest winners not standing beside them was Trek Bicycle Corporation. The Waterloo, Wis.-based manufacturer provided the bicycles that Armstrong rode to seven consecutive Tour victories, and they were back again this year with the carbon-fiber marvels that helped propel Contador and Armstrong into first and third place, respectively, in Paris.
Trek started out with five employees making hand-built steel touring frames in a rented barn in Waterloo in 1976. Today, Trek has long since expanded beyond the barn into modern research, engineering and manufacturing facilities in Waterloo, where the company still produces high-end carbon frames. At the same time, like many manufacturers, Trek has formed partnerships with overseas suppliers in Taiwan and the People's Republic of China that provide components, frames and some fully assembled bikes.
Quality is of supreme importance in the bike industry, of course — no one wants to think about defect issues while they're riding on a sliver of rubber at 40-plus miles per hour down a twisting mountain road — and Trek has been working to drive quality back into its supply chain to ensure that every product coming into its facilities from overseas is up to spec every time. To that end, the company has ramped up the involvement of its supplier quality group with all the new products being developed in Asia. As part of that effort, the company has been working with key suppliers to deploy a system that will give the quality team in Waterloo real-time insights into product quality before a component or frame even leaves the factory in Taiwan or Mainland China.
Quality in Real Time
Julie Wilhelm, supply chain quality manager with Trek, says that, in the past, the bike manufacturer did not have visibility into quality issues until products arrived at its U.S. facilities, when it was too late to take corrective action. "It was the same cause all the time," Wilhelm says. "We hadn't reviewed what the supplier was doing thoroughly enough, and we didn't always provide them with the best specification." Trek was already using a quality solution called ProFicient from InfinityQS International for statistical process control (SPC) within its own facilities, but the company had no way of extending the quality process out to its suppliers' plant floor.
That changed when Wilhelm learned about the eSPC solution that InfinityQS launched in 2006. eSPC is a hosted solution that can connect disparate, far-flung manufacturing locations within a single enterprise or across a supply chain to a shared database of quality data. That allows quality managers and engineers at a central location to analyze supplier quality data and evaluate incoming materials prior to delivery. "Because eSPC is Web-based and was meant to work with suppliers, I latched onto it," says Wilhelm, who had worked with the solution provider's offerings both at Trek and in a previous quality role at Rayovac Corporation.
The functionality that drew Wilhelm to eSPC included the potential to gain real-time access to all key dimensions of Trek's products being manufactured by suppliers. The company's engineers would be able to view those data as they were generated in trend chart format and do capability or other analyses, or download the data for further processing. The solution also provided for real-time alerts via e-mail so that Trek's quality staff on the ground in Asia could learn about developing issues immediately, allowing them to show up at the supplier the same day if necessary to deal with problems before any product left the plant.Cultural Awareness
Beginning in late 2007, Trek initially targeted four suppliers to begin working with eSPC — two in Taiwan, two in Mainland China. The company chose to start with suppliers of higher-end product and focused initially on just one parameter, weight, which is crucial in its top-end bicycles. "We sold it to them from the angle that they were key vendors and that weight is crucial, so they could get onboard with us and start collecting the weight data to stay at the high end of our business," Wilhelm explains.
She adds that Trek chose these specific suppliers in part because they were more proactive in seeking new ways to work with the bike manufacturer. "There are other companies that would have been tougher to work with because they are very much inspection-based and they didn't see the value in investing money upfront to prevent defects," she says. "We purposely picked companies that were more willing to work with us and do what we need. So knowing the culture of the company you're dealing with is very beneficial."
RSS Feeds
